Loading... Please wait...



Hover over image to zoom

  • Image 1
Rutland Inks

 Product Description


  • WB-99 Pigments are vibrant to give the most brilliant color matches.•
  • Combine with WB0249 General Purpose Base for an extremely soft feel on white fabrics at a low cost
  • WB0249 General Purpose Base requires up to 3 minutes longer cure times depending upon dryer configuration
  • Combine with WB0248 Quick Cure Base for faster production demands when printing on 100% cotton lights.


  •  High performance PVC Free Pigment mixing system for 100% cotton light fabrics or dark fabrics when using the discharge process.
  •  Mix thousands of colors using formulas from the OMX Online Ink Mixing software.
  •  Offers colors that are compatible with the WB Discharge base and WB Discharge White.


Mix colors using the formulations provided in the OMX Ink Mixing Software. Mixed WB-99 PS colors may be printed from 86—305 mc. in. (34—120 mc. cm.) mesh range. The tack free formulation allows in-creased coverage; therefore, finer mesh counts may be used for softer hand with minimum loss of color brilliance. Mix colors according to the desired color formula for best results.
Note: For better color matches it may be necessary to hold the white out of very dark saturated shades. Colors should be checked through a 156 mc. in. (62 mc. cm.). Colors will be lighter through finer mesh.

Recommended Printing Techniques

Image area should be filled with ink.
Leave image area flooded to prevent drying in the screen.
For extended non-printing times, mist with a spray of water to prolong wetness of ink.
Washing the garment is the best test for complete fusion.
WB0100 Fiberblock catalyst will help control Fibrillation when 1-2% is added to the ink

Special Recommendations

WB-99 pigments will not cure and must be mixed with a base to cure.
Stir WB-99 PS prior to weighing.
Keep pail closed when not weighing product.
WB-99 PS does require “high speed/high shear” mixing to properly disperse the components and additives. We recommend that customers use a shaker mixer, homogenizer, high speed drill with mixing blade, etc. Hand mixing or “turn-about” mixing is not adequate.
WB-99 inks require a suitable mixing environment to insure mixed products have no cross contamination with other inks. New or properly cleaned utensils, pumps, pails, etc., are required. Utensils should be cleaned with soap and water.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


What's News


Follow us on

Copyright 2019 Roeder Online. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the RUTLAND PS FLUO RED to your wish list.